Applications:
• Containing radiochemical spillage and avoiding contamination
• Recovering spillage of expensive materials
• Protecting hard surfaces to lessen impact
• Water or solvent wick for humidity chambers
• Lining of chemical cabinets, laboratory bench drawers, and laboratory hoods

Features and Benefits

Features and Benefits:
• Material is very strong, making it tear resistant, wet or dry
• Smooth white surface can be written on with ink or pencil and lies flat
• Suitable for saturation with disinfectant to protect benches where pathogens and other bacteria are present
• Use polyethylene side up to collect deposits without absorption
• Paper side quickly absorbs liquid spills preventing liquids from going through to the work surface
• Spillages are trapped in the absorbent paper
•  Benchkote can be incinerated after use; the polyethylene layer does not melt or drip but is rapidly consumed in the flames

General description

Benchkote

Benchkote^® is an absorbent, impermeable material designed to protect laboratory surfaces against hazardous spills. The material features a high-quality, smooth, absorbent Whatman paper which quickly absorbs liquid spills and a laminated polyethylene layer that prevent flow through to the working surface. After use the sheet is incinerated or disposed of acording to local regulations.

Benchkote Plus

Benchkote Plus is a thicker, more absorbent material for more demanding applications and can absorb in excess of 0.75 liters of water per square meter.

Other Notes

Field of Use : For internal research use only. Products are not intended for diagnostic use or resale.

Legal Information

Benchkote is a registered trademark of GE Healthcare

 

Whatman is a registered trademark of GE Healthcare

NANOFOG is a liquid ULV fogger suited to the application of spraying water & oil based liquids in fine particle form for disinfection, pest/germ/odour control applications etc. The fogger runs on a high speed FHP Motor that provides maximum thrust of spray, suitable for fogging. All models are portable products. Entire body is made of Nylon and internal components are made of S.S. & Engg. plastic to resist corrosion and chemical attack. The storage tank ranges from 6.5 Ltrs. (SS316L grade) To 7.5 Ltrs. (HDPE grade), sufficient enough to dispense chemical combinations in various proportions. NANOFOG is thus an ideal unit for all fogging applications.
 

Technical Specifications

• Timer Device
• TIMEX - Digital Timer (Online adjustable from 1 ~ 99 mins.)
• Design
• Portable
• Particle Size
• 1 ~ 40+ Microns (Controllable from Dry fog ~ Wet fog)
• Tank Capacity
• 6.5 ~ 7.5 Ltrs. (SS316L grade / HDPE)
• Power Input
• 230VAC / 5 Hz, Single Phase
• Liquid Flow Rate
• 1 ~ 18 Ltrs./Hr. (Adjustable) Optional: 3 OR 5 Ltrs./Hr. (Fixed)
• Particle Throw
• Visible upto 15 ~ 20 Fts. & more
• Area Coverage
• > 20000 cubic. fts. (uniformly with ROTOSTAND)
• Motor Speed
• 20,000 RPM (approx.)
• Dry Weight
• 6 ~ 7 Kgs.
• Packing Dimensions
• 15 X 15 X 18 Inches

Applications

Aerial disinfection of enclosed areas like hospital O.T.s & I.C.U.s, General treatment for Pest / Germ control, Disinfection of microbial germs at Pharma Labs & R&D Centres, Odour control at various process units, At Storage houses etc.

Thermal sticker for Industrial steam Temperature test 80˚C Each

STAND,DISPLAY,DISPENSER,STERILLIUM
 

These labels withstand conventional and cryogenic storage conditions. The labelwithstands boiling water baths at 100°C and dry heat upto 150°C without degrading.

lxb mm: 38x19

Parafilm M_ is a thermoplastic self-sealing film that holds moisture loss to a minimum.
 

Size (W x L): 11.17 X 21.3

Teepol 10 lit Pack

Tubing - Silicon 8x1.5 mm Cat# M5144

Silicon rubber is heat resistant (can be safely used between -50°C to 250°C). Silicon Tubing can be used for transfering hot liquids and sterile
materials. Silicon tubing has extensive applications in the Pharmaceutical and Food & Beverage Industries.
Now available in all sizes from Inner Diameter: 1.05mm upto 32mm, with Wall Thickness from 0.85mm upto 5.5mm. Please enquiry for any
size not listed here.
Silicon Rubber Tubing Cat#: 5146. ID: 7mm, WT: 3.5mm. is ideal for Vacuum use, due to the high wall thickness. Will not collapse under
vacuum.

Thermal sticker for industrial steam temperature test 60, 70, 80˚C Each

Liquid Chlorine More then 10% 5 Lit Pack

2 inch x 10 yard (5cm x 9,14m) Paper, tape, standard roll

Clear, porous, plastic hypoallergenic tape, standard roll.
Benefits:
Easy, straight, bi-directional tear allows clinician to tailor the tape. 
Porous for breathability. 
Easy to handle with gloves. 
Good adhesive to skin and tubing for secure placement. 
Transparent for easy monitoring. 
Latex-free and hypoallergenic for sensitive patients. 
Water-resistant

This dispenser is designed for smooth film withdraws and clean quick cutting blade cutter small slides across for desired length section.

Packing: 1 PC

Dettol Skincare new Hand Sanitizers

 

Dettol with water dilution

1 inch x 10 yard (2,5cm x 9,14m) Silk-like, hypoallergenic tape, standard roll

Benefits:
High strength for durability.
Adheres well to dry skin.
Conformable.
Latex-free and hypoallergenic for sensitive patients.
Convenient bi-directional tear for easy tailoring.
Versatile.
Water-resistant.

Bytac is a laminate consisting of FEP film that is bonded to vinyl backing. Bytac
provides an easy and economical way to protect bench tops, fume hood surfaces
with a non-stick chemical resistantfluropolymer film. It creates a non-absorbent,
contamination free surface that can be washed with chlorine bleach for clinical and
biological labs. Corrosive chemicals or sticky substances are easily removed by
wiping with a damp sponge.

3 inch x 10 yard (7,5cm x 9,14m) Silk-like, hypoallergenic tape, standard roll

Benefits:
High strength for durability.
Adheres well to dry skin.
Conformable.
Latex-free and hypoallergenic for sensitive patients.
Convenient bi-directional tear for easy tailoring.
Versatile.
Water-resistant.