Burette Stand Metal Victor 17.5x12.5x60cm. (7x5x24”) Cat# M4662

Burette Stands are made from the best available materials. Bases are made from thick, heavily powder-coated Mild Steel, with non-rusting nylon feet. One foot is on a screw for covenient levelling of the base on uneven surfaces. Rods are made from Mild Steel, with high quality chrome-plating to provide a long rust-free life. Also provided with a handle for tightening into the base.

Boss Head Cat# 4731


Powder Coated, aluminium alloy construction. ‘V’ shape securely grips rods. Tightening clamps can be provided either as Tommy Bar or Plastic
Knob. Can accomodate up to 16mm rods in both ‘V’ slots.

Now also available:

Boss-Head in Brass, with Chrome Plating. Much stronger than Aluminium casting.

Boss Head Brass Casting Cat# 4736

Powder Coated, aluminium alloy construction. ‘V’ shape securely grips rods. Tightening clamps can be provided either as Tommy Bar or Plastic
Knob. Can accomodate up to 16mm rods in both ‘V’ slots.

Now also available:

Boss-Head in Brass, with Chrome Plating. Much stronger than Aluminium casting.​

Clamps for Burettes Metal Fisher type Single Cat# M4711

Cut from Mild Steel sheets, these clamps are powder coated. Fingers are sheathed in rubber to securely grip burettes, small columns, etc. With
built-in boss-head. Sizes available are:

Burette Stand Metal Victor Base: 30x20cm. Rod: 90cm x 12mm.  Cat# M4665

Burette Stands are made from the best available materials. Bases are made from thick, heavily powder-coated Mild Steel, with non-rusting
nylon feet. One foot is on a screw for covenient levelling of the base on uneven surfaces. Rods are made from Mild Steel, with high quality
chrome-plating to provide a long rust-free life. Also provided with a handle for tightening into the base.

Universal Clamps  Cat# 4723

Powder coated clamp, with chrome plated rod. Jaws are cork lined. For tightening, Tommy bar can be provided or plastic knob. Total Length: 9”.
Made of Aluminium Alloy with MS screws. For holding Condensors, etc. Boss-head to be purchased separately.

Burette Stand, Metal, Victor 15x10x45cm. (6x4x18”) Cat# M4661

Burette Stands are made from the best available materials. Bases are made from thick, heavily powder-coated Mild Steel, with non-rusting
nylon feet. One foot is on a screw for covenient levelling of the base on uneven surfaces. Rods are made from Mild Steel, with high quality
chrome-plating to provide a long rust-free life. Also provided with a handle for tightening into the base.

Bunsen Burner Advanced 11-101-04 Cat# BLS1243

Cast iron base with riffled gas inlet and 12mm diameter brass tube
chrome-plated burner tube having a screw type sleeve air regulator
around the jet nozzle to adjust the air-gas mixture. The burner is supplied with 2 jets (for LP gas and Natural gas). The spare jet is fitted on the base.

Square Boss Head Cat# 4735

Powder coated clamp, with chrome plated rod. Jaws are cork lined. For tightening, Tommy bar can be provided or plastic knob. Total Length: 9”.
Made of Aluminium Alloy with MS screws. For holding Condensors, etc. Boss-head to be purchased separately.

Burette Stand Metal Victor 20x12.5x60cm. (8x5x24”) Cat# M4663

Burette Stands are made from the best available materials. Bases are made from thick, heavily powder-coated Mild Steel, with non-rusting
nylon feet. One foot is on a screw for covenient levelling of the base on uneven surfaces. Rods are made from Mild Steel, with high quality
chrome-plating to provide a long rust-free life. Also provided with a handle for tightening into the base.

Bunsen Burner With Stopcock Cat# BLS1242

Cast iron base with riffled gas inlet and stopcock to regulate the flow of gas.
The burner tube is 12mm in diameter, brass chrome-plated burner tube
having a screw type sleeve air regulator around the jet nozzle to adjust the air-gas mixture. The burner is supplied with 2 jets (for LP gas and Natural gas). The spare jet is fitted on the base.

Combined Clamps Cat# 4725

Powder coated clamp. Jaws are cork lined. With built-in Boss-head. Made of Aluminium Alloy with MS screws. Without rod.

3 Finger Clamps Brass Casting Cat# M4726

Powder coated clamp, with chrome plated rod. Jaws are Rubber sheathed. For tightening, Tommy bar can be provided or plastic knob. Made of
Aluminium Alloy with MS screws. Total Length: 9”. For holding Condensors, Columns & other general glassware. Boss-head to be purchased

Now also available:
3 Finger Clamps in Brass, with Chrome Plating and Stainless Steel Rod. Total Length: 9”. Much stronger than Aluminium casting.

 

Burette Stand Metal Victor 22.5x15x60cm. (9x6x24”) Cat# M4664

Burette Stands are made from the best available materials. Bases are made from thick, heavily powder-coated Mild Steel, with non-rusting
nylon feet. One foot is on a screw for covenient levelling of the base on uneven surfaces. Rods are made from Mild Steel, with high quality
chrome-plating to provide a long rust-free life. Also provided with a handle for tightening into the base.

3 Finger Clamps Cat# M4721

Powder coated clamp, with chrome plated rod. Jaws are Rubber sheathed. For tightening, Tommy bar can be provided or plastic knob. Made of
Aluminium Alloy with MS screws. Total Length: 9”. For holding Condensors, Columns & other general glassware. Boss-head to be purchased

Now also available:
3 Finger Clamps in Brass, with Chrome Plating and Stainless Steel Rod. Total Length: 9”. Much stronger than Aluminium casting.

Clamps for Burettes Metal Fisher type Double Cat# M4712

Cut from Mild Steel sheets, these clamps are powder coated. Fingers are sheathed in rubber to securely grip burettes, small columns, etc. With
built-in boss-head. Sizes available are:

4 Finger Clamps Universal Clamp Cat# 4722

Powder coated clamp, with chrome plated rod. Jaws are cork lined. For tightening, Tommy bar can be provided or plastic knob. Total Length: 9”.
Made of Aluminium Alloy with MS screws. For holding Condensors & other glassware. Boss-head to be purchased separately.